Yamaha PC412DI 4-Channel Amplifier (4 x 1200w at 8ohms)

The impressive 20 x 8 input matrix capability of Yamaha PC412-DI amplifier combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard. Yamaha PC412-DI is also compatible with ProVisionaire Touch and ProVisionaire Control, and we can provide customized remote controls if required. 1200W x 4 at 8O. Switchable for low and high impedance speaker systems. Features 4 x 1200W at 8O, 4 x 1200W at 100V/70V 20 x 8 powerful input matrix function Sampling frequency is up to 96k 16ch Dante input/output Speaker processor such as 16 band PEQ, crossover, filters, delay and limiter Yamaha speaker presets Remote control via ProVisionaire Touch/Control Specifications Output Power; 1kHz, Non-clip, 20msec Burst, All channels driven 8O: 1200W x 4 Amplifier class: Class D, Single ended output Total harmonic distortion: 0.01% (8O, 1kHz, 10W, All channels driven), 0.1% (4O, 1kHz, Half power, All channels driven), 0.01% (100V/70V, 1kHz, 10W, All channels driven), 0.1% (100V/70V, 1kHz, Half power, All channels driven) Frequency response: +0.5, -1.5dB (8O, 1W, 35Hz to 20kHz) Crosstalk: ? -60dB (8O, 1kHz, Half power, Input 150O shunt A-weighted) S/N ratio: 112dB (8O, Gain setting = 32dB, A-weighted) 8O Volume max: 32.0dB/+10.0dBu (Gain setting: 32dB), 26.0dB/+16.0dBu (Gain setting: 26dB), 38.0dB/+4.0dBu (Gain setting: +4dBu), 28.0dB/+14.0dBu (Gain setting: +14.0dBu) Hi-Z 100V mode, Volume max: 32.0dB/+10.2dBu (Gain setting: 32dB), 26.0dB/+16.2dBu (Gain setting: 26dB), 38.2dB/+4.0dBu (Gain setting: +4dBu), 28.2dB/+14.0dBu (Gain setting: +14.0dBu) Hi-Z 70V mode, Volume max: 32.0dB/+7.2dBu (Gain setting: 32dB), 26.0dB/+13.2dBu (Gain setting: 26dB), 35.2dB/+4.0dBu (Gain setting: +4dBu), 25.2dB/+14.0dBu (Gain setting: +14.0dBu) Load protection: POWER switch on/off: Output mute, Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset, DC-fault: Power supply shutdown (NOT restored automatically) Amplifier protection: Thermal: Output limiter (Restored automatically) ? Output mute (Restored automatically), Over current: Output mute (Restored automatically), Over voltage: Output limiter (Restored automatically), Integrated Power Limit: Output limiter (Restored automatically) Power supply protection: Thermal: Output limiter (Restored automatically) ? Power supply shutdown, Over voltage: Power supply shutdown, Over current: Power supply shutdown Cooling: 7 step variable speed fan x 3, front to rear airflow Maximum input voltage: +28dBu Input impedance: 20kO (balanced) Sampling frequency rate: 96kHz A/D D/A Converters: AD: 32-bit linear, 64 times over sampling; DA: 32-bit linear, 128 times over sampling Channel count: 16 IN with Dante Redundancy, 16 OUT Sampling frequency: 96/88.2/48/44.1kHz Dante latency: 0.25/0.5/1/2/5ms Bit depth: 32/24bit Processors: 20 x 8 input matrix mixer, Room EQ: 16 band IIR EQ, Room Delay: 0 - 1000msec, Speaker Processor: X-Over (IIR/FIR*), PEQ (16 band IIR/FIR*), Delay, Peak Limiter, RMS Limiter Latency: Analog Input to Speakers: 0.9msec; Dante Input to Speakers (Dante latency setup = 0.25msec): 1.5msec (fs=96kHz), 1.6msec (fs=88.2kHz), 2.0msec (fs=48kHz), 2.1msec (fs=44.1kHz) Analog Input: Euro block 6pin x 2 (4ch balanced input) Digital I/O: Dante Interface: RJ45 x 2 (Redundant/Daisy Chain) Speaker Output: 7.62mm Euro block 8pin x 1 Control ports: RJ45 x 1 AC: AC inlet (powerCON 20A) x 1 Others: Remote, Fault Output: Euro block 8pin (mini) x2 (GPI x 4, GPO x 6, +5V x 2) Indicators: Power (Green) x 1; Channel Status x 4 : Signal (Green), Limit (Yellow), Protect/Mute(Red); Auto LED off and dimmer feature (except POWER LED) Power requirements: 100V - 240V 50Hz/60Hz ** Power consumption: 1850W (1/8 MAX power, 2O, Pink noise at all channels), 190W (Idle), 105W (Sleep,all channels), 9W (Standby 100V/120V), 12W (Standby 230V) Operating temperature: 0°C to +40°C Storage temperature: -20°C to +60°C Width: 480mm (18.90 inch) Height: 88mm (3.46 inch): 2U Depth: 528mm (20.79 inch) Net weight: 16.0 kg (35.3 lbs) Accessories: Owner's Manual x 1, Power Cable (2.0m) x 1, GPIO Mini Euroblock plug 3.5mm 8p x 2, Audio Input Euroblock plug 5.08mm 3p x 4, Cable tie x 4, Speaker Euroblock plug 7.62mm 8p x 1, Air filter (L x 1, R x 1), Grill (L x 1, R x 1), Handle x 2, Screw x 4