Yamaha PC412D 4-Channel Amplifier (4 x 1200W at 8ohms)

The impressive 20 x 8 input matrix capability of Yamaha PC412D amplifiers combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard. Yamaha PC412D is also compatible with ProVisionaire Touch and ProVisionaire Control, and we can provide customized remote controls if required. 1200W x 4 at 8O. Features 4 x 1200W at 8O 20 x 8 powerful input matrix function Sampling frequency is up to 96k 16ch Dante input/output Speaker processor such as 16 band PEQ, crossover, filters, delay and limiter Yamaha speaker presets Remote control via ProVisionaire Touch/Control Specifications Output Power; 1kHz, Non-clip, 20msec Burst, All channels driven 8O: 1200W x 4 Amplifier class: Class D, Single ended output Total harmonic distortion: 0.01% (8O, 1kHz, 10W, All channels driven), 0.1% (4O, 1kHz, Half power, All channels driven) Frequency response: +0.5, -1.5dB (8O, 1W, 35Hz to 20kHz) Crosstalk: ? -60dB (8O, 1kHz, Half power, Input 150O shunt A-weighted) S/N ratio: 112dB (8O, Gain setting = 32dB, A-weighted)8O Volume max: 32.0dB/+10.0dBu (Gain setting: 32dB), 26.0dB/+16.0dBu (Gain setting: 26dB), 38.0dB/+4.0dBu (Gain setting: +4dBu), 28.0dB/+14.0dBu (Gain setting: +14.0dBu) Load protection: POWER switch on/off: Output mute, Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset, DC-fault: Power supply shutdown (NOT restored automatically) Amplifier protection: Thermal: Output limiter (Restored automatically) ? Output mute (Restored automatically), Over current: Output mute (Restored automatically), Over voltage: Output limiter (Restored automatically), Integrated Power Limit: Output limiter (Restored automatically) Power supply protection: Thermal: Output limiter (Restored automatically) ? Power supply shutdown, Over voltage: Power supply shutdown, Over current: Power supply shutdown Cooling: 7 step variable speed fan x 3, front to rear airflow Maximum input voltage: +28dBu Input impedance: 20kO (balanced) Sampling frequency rate: 96kHz A/D D/A Converters: AD: 32-bit linear, 64 times over sampling; DA: 32-bit linear, 128 times over sampling Channel count: 16 IN with Dante Redundancy, 16 OUT Sampling frequency: 96/88.2/48/44.1kHz Dante latency: 0.25/0.5/1/2/5ms Bit depth: 32/24bit Processors: 20 x 8 input matrix mixer, Room EQ: 16 band IIR EQ, Room Delay: 0 - 1000msec, Speaker Processor: X-Over (IIR/FIR*), PEQ (16 band IIR/FIR*), Delay, Peak Limiter, RMS Limiter Latency: Analog Input to Speakers: 0.9msec; Dante Input to Speakers (Dante latency setup = 0.25msec): 1.5msec (fs=96kHz), 1.6msec (fs=88.2kHz), 2.0msec (fs=48kHz), 2.1msec (fs=44.1kHz) Analog Input: XLR-3-31 x 4 Digital I/O: Dante Interface: etherCON x 2 (Redundant/Daisy Chain) Speaker Output: Neutrik speakON NL4 x 4 Control ports: RJ45 x 1 AC: AC inlet (powerCON 20A) x 1 Others: Remote, Fault Output: Euro block 8pin (mini) x2 (GPI x 4, GPO x 6, +5V x 2) Indicators: Power (Green) x 1; Channel Status x 4 : Signal (Green), Limit (Yellow), Protect/Mute (Red); Auto LED off and dimmer feature (except POWER LED) Power requirements: 100V - 240V 50Hz/60Hz ** Power consumption: 1850W (1/8 MAX power, 2O, Pink noise at all channels), 190W (Idle), 105W (Sleep, all channels), 9W (Standby 100V/120V), 12W (Standby 230V) Operating temperature: 0°C to +40°C Storage temperature: -20°C to +60°C Width: 480mm (18.90 inch) Height: 88mm (3.46 inch): 2U Depth: 528mm (20.79 inch) Net weight: 16.0 kg (35.3 lbs) Accessories: Owner's Manual x 1, Power Cable (2.0m) x 1, GPIO Mini Euro block plug 3.5mm 8p x 2, Air filter (L x 1, R x 1), Grill (L x 1, R x 1), Handle x 2, Screw x 4