The f6 is compact and easy to position. With a wide frequency response of 40 Hz - 16 kHz and the ability to handle sound pressure levels of 140 dB, the f6 is an excellent choice for miking instruments requiring extended low frequency reproduction such as kick drum, large toms and bass cabinets. The f6 is manufactured with a precision cast zinc alloy body, durable black E-coat finish, dent resistant steel mesh grill, and gold plated XLR connector. Transformerless design, low impedance and balanced output allow for interference-free performance even with long cable runs USER TIPS The f6 is designed with low output in order to compensate for instruments having very high sound pressure levels. Kick drums: For kick drums, as a general rule, start with the mic positioned centered inside the middle of the drum pointed towards the beater. For more attack, and less bass boom, move the mic closer to the beater. For less attack and more bass, move the mic further away from the beater. For kick drums without hole in front head, place the f6 a few inches from the head for a large dynamic sound. Toms: For toms, position the mic 2 inches from the head and point towards the center of the drum. Bass cabinets: For bass cabinets, position the mic 90 degrees to the grill cloth and 1-2 inches inside the edge of the speaker. Applications Live stage, home studio Kick drum, floor tom Bass cabinets, Leslie bottom Features Affordable dynamic instrument mic for live sound or home studio Punchy low end with excellent attack 3 year warranty Specifications Transducer Type Dynamic Frequency Response 55 Hz - 15 kHz Polar Pattern Hypercardioid Output Impedance 580 ohms Sensitivity 2.2 mV / Pa @ 1k Capsule Technology LM Type A Off Axis Rejection >20 dB Maximum SPL =137 dB Power Requirements None Connector 3-pin XLRm Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector Materials / Finish Zinc Alloy / Black Finish Product Weight 283 g / 10 oz Product Length 145 mm / 5.7 in