Audio-Technica LP60X Fully Automatic Belt-Drive Stereo Turntable in Black

An update of the popular AT-LP60, the ATLP60X features a redesigned tonearm base and headshell to improve tracking and reduce resonance. Noise is further reduced by the inclusion of an AC adapter that moves the AC/DC conversion outside of the chassis where its impact on the signal chain is limited.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the AT-LP60X’s Dual Magnet™ cartridge with replaceable stylus. The cartridge is integrated into the headshell for assured performance and ease of setup.

The turntable comes with a detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and a removable hinged dust cover. 

Features

• Experience the high-fidelity audio of vinyl
• Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
• Anti-resonance, die-cast aluminum platter
• Redesigned tonearm base and headshell for improved tracking and reduced resonance
• Integral Dual Magnet™ phono cartridge with replaceable diamond stylus (ATN3600L)
• AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Built-in switchable phono pre-amplifier for phono- or line-level output
• Includes: detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and removable hinged dust cover

Specifications

• Type: Belt drive turntable, fully automatic
• Motor: DC servo-controlled
• Speeds: 33-1/3 RPM, 45 RPM
• Turntable Platter: Aluminum
• Wow and Flutter: Less than 0.25% (WTD) @ 3 kHz
• Signal-to-Noise Ratio: >50 dB (DIN-B)
• Output Level: Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec; Pre-amp “LINE” 150 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
• Power Supply Requirements: 100 to 240 V, 50/60 Hz, 0.6 A Max.
• Power Consumption: 1.0 W
• Dimensions: 359.5 mm (14.15") W x 97.5 mm (3.84") H x 373.3 mm (14.70") D
• Weight: 2.6 kg (5.73 lbs)
• Accessories Included: Dust cover, Felt mat, Platter (with drive belt), 45 RPM adapter, RCA audio cable (approx. 1.2 m (3.9'')), AC adapter (approx. 1.5 m (4.9''))
• AC adapter: 12 V, 2 A
• Replacement Stylus: ATN3600L