Audio-Technica ATM710 Cardioid Condenser Vocal Mic for Studio Quality Vocal Reproduction

This electret singing microphone from the Artist Series range is designed for detailed and faithful voice reproduction. With a capacitor designed for studio-quality performance, the ATM710 provides remarkable clarity. This microphone is equipped with an integral 80Hz low-cut filter that allows easy switching from a flat frequency response to severe attenuation position which reduces the sensitivity of the microphone pops when used in proximity to voice. The ATM710 is also equipped with a 10 dB switchable attenuator that reduces the sensitivity of the microphone and provides superior SPL capacity. The cardioid microphone improves isolation of the sound source and reduces pickup of sounds to the sides and rear. Features Excels in venues with controlled stage volume or in-ear monitoring Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source Superior anti-shock engineering for reduced handling noise and quiet performance Condenser design for studio-quality performance Integral 80 Hz HPF switch and 10 dB pad switch Corrosion-resistant contacts from gold-plated XLRM-type connector Rugged, all-metal design and construction for years of trouble-free use Quiet-Flex™ stand clamp provides silent, exible microphone positioning Product guaranteed for 15 years Specifications Element: Fixed-charge back plate permanently polarized condenser Polar Pattern: Cardioid Frequency Response: 40 - 20,000 Hz Open Circuit Sensitivity: -40 dB (10.0 mV) re 1V at 1 Pa Impedance: 200 ohms Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal) Low Frequency Roll Off: 80 Hz, 12 dB/octave Dynamic Range: 127 dB, 1 kHz at Max SPL Signal-to-Noise Ratio: 73 dB, 1 kHz at 1 Pa Phantom Power Requirements: 11-52V DC, 3.5 mA typical Weight: 274g Dimensions: 179.0 mm (7.05) long, 50.0 mm (1.97) diameter Output Connector: Integral 3-pin XLRM-type Accessories Included: AT8470 Quiet-Flex® stand clamp for 5/8-27 threaded stands; 5/8-27 to 3/8-16 threaded adapter; soft protective pouch